June 23, 2010, the State General Administration of Quality Supervision, Inspection and Quarantine issued a 2010 batch product quality supervision and inspection results of the Notice (No. 63 of 2010, see Office website), on 27 categories of industrial production, etc. the national product quality supervision and inspection.
Among them, the machine tool industry is involved in milling and drilling, a total sample of Beijing, Liaoning, Jilin, Heilongjiang, Shanghai,glue stick Jiangsu, Zhejiang, Anhui, Jiangxi, Shandong, Guangxi and other 11 provinces, autonomous regions and municipalities in 34 of 34 production products. The sampling based on "Metal Cutting Machine Tool General safety requirements" GB15760-2004, and "Safety of machinery Electrical equipment of machines Part 1: General requirements" GB5226.1-2002 and other related products for the national compulsory standards and requirements of the standard of milling, drilling products, leakage, geometric accuracy, winding and involved in dangerous, stopper, and mechanical overload protection, locking devices, interlocking devices, clamping devices, protective devices, start, stop, emergency stop, noise, splash , operating reliability, power switch, protective grounding, insulation test, the circuit overcurrent protection, motor overload protection,glue gun electric shock protection, and control transformers, and other important safety and performance of the 22 items tested. Spot checks found 4 product protection grounding, power switch and other projects related to test results do not meet the standards. Sampling results show a pass rate of 88.2%. With the previous year on the milling and drilling products, sampling results, compared with a pass rate increased by 6.6 percentage points.
The results of this national supervision once again remind us that the quality of work is a long-term strategic task that requires the industry to work with perseverance. For the random problems exposed, one by one company should work hard to rectify. The time has more than half of this year, more urgent to enhance product quality. The majority of member companies in accordance with General Secretary Hu Jintao on the quality of work, "focuses on the implementation, focusing on persistence, focusing on strict management," the written instructions, thoroughly implement the scientific concept of development, enhance product quality through real work, and promote enterprise restructuring , on the level, change the mode of economic development. In the quality of work, to further implement the "quality work on strengthening guidance for industrial products" (Ministry of Industry Branch [2009] 180), based on independent innovation through the strengthening of capacity building and implementation of brand strategy and vigorously promote the development and species brand development work in depth. To highlight the quality of the dominant position of enterprises, establish and constantly improve the full, the entire process of comprehensive quality management system and quality credit system, and actively carry out activities and well-brand "QC group," "Quality Month" and other forms of mass of quality management activities to product development, quality improvement, brand building and service improvement as the focus, the product quality to a higher level.