Step 1: Choose your Cabinet APC NetShelter SX rack is in the 10 years based on feedback from customers, the current IT market for high-density server and networking applications designed for next-generation trends in the cabinet solutions. NetShelter.
SX rack focused on cooling, glue stick power distribution, cable management and environmental monitoring equipment for critical tasks provides a reliable rack-mount environment.
NetShelter.
SX a variety of characteristics enable more flexible.
With the roof inlet n.
Tool-free disassembly n.
8 large inlet n
Combination with the top of the wiring system.
Half-height of the side panels n.
Simple safety n.
Side can be locked.
Easy to adjust the vertical mounting rail n.
Loosen the screws only n.
6.35mm (1 / 4 inch) adjustable in steps of n.
Automatic alignment.
Rear cable channel n.
Tool-free installation PDU n.
Tool-free installation of the vertical cable management device.
Step 2: Choose your cable management.
Large-capacity vertical cable management vertical cable ring for installation in a typical network environment, convenient cable laid. 750mm wide and is usually installed in front of the cabinet on the corner of regulation.
Low altitude, tool installation,glue gun vertical cable management accessories, do not account for the internal U rack space. Occupy the rear of the cabinet side of the cable channels throughout the two installation groove. Tool installation, vertical cable management accessories, quick installation, no accounts within the cabinet U space. Only occupy the back of the cable channels, a mounting slot, the other can be used for installation of vertical rack mount PDU.
Horizontal cable management AR8426A AR8425A and cable management accessories help eliminate cable stress and maintain a cabinet or rack cables neat and orderly layout.
AR8428.
Convenient front cable management, cable can pass to the back of the device. Occupy 2U rack space.
Top cable trough cable power cable management slots in the NetShelter enclosure system can be laid at the top of the power cable. Cable slot in the roof can be installed without tools, and can be realized easily installed.
Partitions partition data cable data cables can be laid to achieve the top of the NetShelter enclosure network cable. Partitions can be installed without tools in a different location on the roof. Solid partition for the installation of the front, in order to facilitate clean appearance.
Cable ladder and cable ladder for the line between power and data between channels, cable laying, 6 inches wide and 12 inches wide and two specifications. Accessories include cables for free tools to install hardware on the tank and the bulkhead.
Step 3: Choose your cabinet power distribution.
Switch rack mount PDU power socket can be a single remote control and monitoring of the distribution of total power consumption remote management capabilities ● ● ● remote control of a single socket power alarm threshold delay ● ● local current monitoring display.
Measurement-based rack-mount PDU can monitor the total power consumption of connected devices distribution unit ● monitoring local and network-based local current monitoring display ● ● Load LED indicator ● ● Wide range of alarm threshold input and output connection to the basic type Rack Mount PDU power distribution for rack mounted equipment ● single input, multiple output socket ● horizontal or vertical cabinet installation.
Step 4: Select the flow management.
Tool Blind 1U modular flow management blind, by covering unused rack space, to prevent air back. KoldLok raised floor outlet hole to accommodate cable of these pre-configured device for coverage under the raised floor cable cut to help air flow management, while at the same allow sufficient cable through.
Step 5: Select Install the hardware shelf AR8122BLK AR8105BLK fixed shelf and can be tower equipment, monitors and other equipment installed in the cabinet environment.
AR8123BLK AR8128BLK Sliding shelves and can be tower equipment, monitors and other equipment installed in the cabinet environment.
AR8126ABLK drawer design allows all standard 17-inch keyboard for easy operation and inclusion. Kit AR8100 M6 mounting hardware, and hardware for installation in a square hole rack rails installed equipment. Number of 32 sets of M6 lock nuts, nylon washers and the word / Cross screws.
AR8006A for non-rack mount equipment installed in the cabinet. These rails can support the maximum width of 43cm to 45cm, maximum weight of 91kg of equipment.
AR7701 NetShelter SX enclosures for the latch-type bracket. To meet the UBC 4 seismic anchoring requirements. AR7700 solid plate in a single cabinet to prevent tipping.
AR7600 when the cabinet to cabinet 24-inch intervals and when the decorative package.
Step 6: Add a cooling rack and airflow strong emission unit ACF400 ACF402 NetShelter SX and VX enclosures for high-density equipment in high-performance heat.
And ACF402 ACF400 ACF127 for the exhaust pipe kit.
Rack air distribution unit installed in the cabinet bottom ACF002 2U, machine room floor to overcome the negative static pressure, the cold air distribution to the top of the cabinet. InRow SC ACSC101 rapidly deployable line-level integration of air conditioning for server rooms and wiring closets.
For more APC-related content, please visit www.apc.com / cn, please enter the code: 46499f click on the link below, fill in relevant information, a chance to win PNY 4G thin U disk. https: / / www.apcc.com/tools/registration/promo/RegisterCustomer.cfc?ISOcountrycode=cn&method=getPromo&keycode=46499f.
About APC: Schneider Electric's APC, a global leader in critical power and cooling services for home users, office space, data centers and manufacturing applications to provide advanced products in the industry, software and systems. With its solid strength, experience, and a wide range of Schneider Electric Critical Power and cooling throughout the entire service network to provide services to APC's comprehensive program life cycle, seamless installation, and maintenance of the overall solution. Through its unique relentless innovation, APC is critical to provide innovative technology and industrial applications of energy efficiency solutions. In 2007, APC acquired by Schneider Electric and its subsidiary MGE UPS successfully merged into a subsidiary of Schneider Electric to provide critical power and cooling services. APC revenue in 2008 reached 26 billion euros (APC-MGE sales with 3.6 billion U.S. dollars), 12,000 employees worldwide. APC solutions include uninterruptible power supplies (UPS), precision cooling units, racks, physical security, and planning and management software, including the industry's most comprehensive integrated power, cooling, and management solutions - APC InfraStruXure ? architecture. Schneider Electric, with 114,000 employees and operations in 100 countries worldwide, with 2008 sales of 18.3 billion euros. For more information on APC, please visit www.apc.com, all trademarks are the property of their respective owners.