Deposit before clean
Most pesticide on the spray of corrosion function, so after use should be timely cleaning. Spray after discontinuation of liquids, first put barrels, hose, spray pole, the pump unit etc shell is swabbed clean. Again next with buck wash again (sprayed with bordeaux mixture aerosols the commissions.the buck soak 1 ~ 2 hours). Final rinse off with cotton cloth is wiped, avoid by all means insolate.
Coating quality grease, brush paint protection
Can disassemble parts to tear open come down to clean, spray nozzle inner pole, with oil pipe flushing, lest damp rust. Whatever the screw parts or is often to wear place, should be coated with high quality grease (butter). Thin-walled steel parts, can be mixed good paint brush equably on their surface or off paint parts, ensure long time don't rust.
Prevent rubber parts stick on oil
A vaporizer metal parts with oil anti-rust, attention shall be paid to avoid rubber pieces sticky on oil. Because rubber parts once-benign oils, easy ageing, cracks, shorten service life.
In the open air, drying, from the sun's warehouse
Spray not in damp corner, also do not open deposit, should be put in indoor and ventilated, dry and from the sun's place. Because there are many components is aerosols by rubber and plastic, these products by oxygen in the air and the ultraviolet ray in sunshine action, aging metamorphism, make rubber parts of elastic worsen or broken.
Spray rod breaking or spray outer barrel cracks will mend
Find gush rod breaking or spray outer barrel crack, can buy PSI crash plastic glue stick or other plastic repair glue repair. First will repair place clean and eliminate oil stains and make the surface roughness. Remove pipe crash plastic colloid, and cut off the dosage required, will crash plastic colloid darkened with two kinds of different color of skin is fully knead by hand materials monochromatic (about 1 ~ 2 minutes) can be used. In case of low temperature condition, can use the difficult &tenderizing will colloid appropriate heated to room temperature or slightly above room temperature after use.
Prevent small animals gnaw bite
Many farmers aerosols in storage is in the process of mice and other small animals by gnawing on aerosols, therefore, should be stored in a antipests, pest place, best hanging in barns in the wall.